From RCR News- the largest tower companies in the US. Please note that the list is fairly incomplete and just shows those that have contacted RCR News.
American Tower Corp. 22,288
Crown Castle International Corp. 12,910
Global Signal Inc. 11,000
SBA Communications Corp. 5,500
Global Tower Partners 2,357
Clear Channel Vertical Real Estate 1,378
National Grid Wireless 450
TowerCo L.L.C. 360
Subcarrier Communications, Inc. 280
Optasite Inc. 268
Roberts Tower Company, LLC 186
Southeast Towers L.L.C. 175
Communication Enhancement L.L.C. 140
Day Wireless Systems 110
Dobson Cellular Systems Inc. 91
Liberty Towers 83
Wichita Towers LLC. 64
Lattice Communications L.L.C. 48
Towers of Texas Inc. 37
Skyway Towers LLC. 30
Central States Tower L.L.C. 28
Chesapeak-Ridan LLC 20
ClearShot Communications 20
City Switch L.L.C. 7
Are Investors Getting Spooked by Build-to-Relocate Tower Strategies? Last month, two major private cell tower…
What a Team Icebreaker Revealed About Who We Really Are At our April 27th virtual…
Case Study: T-Mobile Wants to Triple Your Rooftop Cell Site — Should You Let Them?…
Short answer: almost never. Longer answer below, because if you're a landowner trying to figure…
Good and Bad for 2025Rather than the usual brag-fest, here's what actually happened in 2025—the…
The current situation on Martha’s Vineyard is a textbook example of what happens when an…
View Comments
I need a tower I work from home and live in a rural area. Please call me with information.
Thank you.
Elaine Hathorn
972-765-7061
Hi ,
Can you provide a proposal to furnish and install the tower as specified below?
Thanks very much!
PROJECT
South Filtered Water Tank Communications Building and Tower
Champlain Water District, S. Burlington, VT Section 13120
Engineer: Dufresne Group Page 2
GENERAL CONTRACTOR: Preload LLC
SPECIFICATION
B. Communications Tower
1. Communications tower shall be model 2400SRWD freestanding tower as
manufactured by Sabre Industries.
2. The tower will be triangular in design, 2' - 0" on a face and consist of solid
welded 20' sections.
3. The tower shall be designed to support the following equipment with
allowance for 100% future growth: One (1) model ANR440F6 antenna
mounted at a height of 68 ft above based with mounting design for one 3 foot
sidearm.
4. Tower shall include the following materials:
a) Complete tower steel and hardware
b) Anchor bolts and templates
c) Climbing ladder incorporated into one (1) face
d) Waveguide support ladder incorporated into three (3) faces
e) Three (3) foot sidearm each with with two (2) tiebacks with one (1) 5'
mounting pipe @ the 68' elevation
f) Safety cable kit without harness (100')
g) Anti-climb panels
h) 10' x 3/4" lightning rod copper clad and stiffener and all necessary
grounding equipment.
5. Foundation for tower shall be in accordance with the requirements of the
manufacturer.
Hi- we don't build or construct towers. So we would not be able to provide a quote.